Flat chastity cage (screw lock·removable urethral tube·3 base rings)

A 304 stainless steel chastity cage that closes the front with a flat disc. There is no tube-shaped cage running forward. The disc sits directly against the base ring, so there is no space to extend forward while confined.

The control a flat disc creates

A disc 4.5cm across closes the front completely and holds back erections. Nothing protrudes forward the way it does on a long cage, so the outline under clothing is small, and the pressure spreads over a wide surface instead of gathering at one point. The disc is pierced with ventilation holes, so water passes through when you wash it.

A urination tube that comes off

A 7.5mm urination tube screws into the hole at the center of the disc, and you can leave it out if you do not need it. With the tube fitted, urine runs out along the tube. Without it, urine passes straight through the center hole.

A hex screw instead of a key

The lock is a hex screw and a wrench rather than a padlock. There is no protrusion to catch on clothing, and only the person holding the wrench can open it, so control works the same way it would with a key. The ring is chosen from three sizes, 4cm, 4.5cm and 5cm.

Before you use it

The original description also says not to wear it continuously for more than 24 hours. The flat design is closed at the front, so it ventilates less than a long cage, and lubricant is needed to put it on and take it off. It cannot be opened without the hex wrench, so keep a spare wrench somewhere separate.