Stainless steel curved chastity cage (7cm·3 ring sizes)

A short curved stainless steel chastity cage, 7cm long with a barrel diameter of 3.4cm. The polished stainless steel frame is held together by welds, and the brass lock sits inside the joint between the cage and the ring so the whole piece reads as one part. The tip of the cage is pierced with an opening for urination and cleaning.

A 7cm cage that curves with the body

If a long cage has felt like it gets in the way, this one takes a different direction. At 7cm it is short, and it curves along the line of the body, so it digs in less when you sit at work or walk. It also shows its shape less under thin clothing. The barrel diameter is 3.4cm.

A lock that does not hang outside

A lock hanging off the outside of a cage catches on clothing and makes noise. Here the brass lock mechanism sits at the point where the cage meets the ring, so there is no loop sticking out. A spare key is included as well.

Three rings and how to measure

The ring comes in 4cm, 4.5cm and 5cm. Start by measuring the circumference at the base with a tape measure while relaxed; the right size leaves a little room between the ring and the skin once worn. A light coat of water-based gel on the ring makes it easier to pass through.

What to know before you use it

Stainless steel is heavier than a plastic cage and cold on first contact in winter. Because it is welded by hand, the key can grow stiff unless you oil the lock cylinder now and then. A 7cm cage is on the short side, so anyone with generous length may find the pressure strong.