Transparent dual-layer chastity cage

A transparent chastity cage assembled by layering an inner frame and an outer cover. It comes with four rings of 40mm, 45mm, 50mm and 55mm inner diameter, along with spacers that set the gap and a key. The cage is a short shape, 40mm wide and 46mm high.

A structure that assembles in two layers

The inner frame is open through the middle at a width of 30mm, which is where the body sits, and the outer cover goes over it to make the second layer. That is one more assembly step than a cage molded in a single piece, but because you close a cover over it, getting into position is easier. The front of the cover has a long slot, so you can urinate while locked.

Four rings to size yourself with

With four rings from 40mm up to 55mm in the box, you can order without having settled on a size and then decide by trying them against the body. For a first-time user that makes a real difference. Spacers of different lengths fit between the ring and the cage to adjust how closely it sits. A short spacer holds it tighter to the body, a long one leaves more slack.

What the transparent resin gives you

The material lets you see inside, so the locked state is visible as it is. It is not heavy or cold the way metal is, which makes long wear less demanding. For the same reason, though, it is not as strong as metal.

What to know before you use it

A resin cage can crack if it takes a hard knock or too much force. Disinfecting with hot water deforms it, so use only lukewarm water and mild soap. With two layers, grime is easy to leave behind between them, so it is worth taking the cage apart to wash every few days.