Ring-style stainless chastity cage (cock ring included·urethral rod)

An open stainless steel chastity device built from linked rings. Rather than a tube placed over you, several rings of differing diameter are threaded onto a spine bar to enclose the body, and a urethral rod that runs through the center comes with it.

A frame built from a double ring and three rings

The base is a double structure of overlapping 45mm and 52mm rings, holding the scrotum and the penis together. The rings that wrap the shaft come in three diameters, 33mm, 35mm and 38mm, set one behind the other so the girth changes as you move forward. Everything between them is open, which makes this the easiest shape to ventilate and to clean.

A 90mm urethral rod

The urethral rod is 90mm long, tapering to 4mm at the tip and running to 8mm further in. There is a rounded bead at the end, and it is fixed to the frame with a hex screw. If it feels like too much, you can take the rod out and wear only the ring frame.

A hex screw instead of a padlock

It tightens with a hex key rather than a key operated padlock, so there is no protrusion to catch on clothing. Only the person holding the key can undo it, so control works the same way as it does with a key.

Before you use it

There is no original description for this product, so the measurements are the values read from the specification table in the product photographs. The open design leaves little covered, so it is quite exposed to the eye, and because the set includes a urethral rod the risk is greater as well. If you lose the hex key you cannot undo it, so decide on a place to keep a spare.