Cobra chastity cage (resin·matte black·4 base rings)

A resin chastity cage modelled on the head of a cobra. It is shaped along a curve resembling an erect glans, and the hollow lattice structure makes ventilation and cleaning straightforward. At about 100g it is lighter than a metal cage.

An open lattice and a joint that does not rattle

The whole cage is opened up as a lattice, so air passes through and less moisture builds up over a long wear. The groove where the cage meets the base ring locks together tightly, so nothing rattles while it is worn and there is less chance of skin catching in the joint. When you wash it, water runs straight through the lattice.

Resin and a matte coating

The material is a resin suitable for sensitive skin, and the surface is finished especially smooth. Being 3D printed, it is light and rigid, and the seller adds a matte black electrostatic coating on top of that, which cuts down the problem of white mold marks appearing on the surface.

It stays on in water

You can keep it on in the shower, and in a hot tub or a swimming pool as well. It works with water-based, oil-based and silicone lubricants alike, so it is not fussy about which you use. Clean it with soap and warm water, or with alcohol.

Before you use it

Being 3D printed resin, it is rigid but weak against impact, so dropping it or knocking it can crack it. The coated surface strips if you scrub it with a brush, so do not press hard when cleaning it. If you want something tougher, a stainless steel version of the same cobra shape is the better choice.