Plastic chastity cage (adjustable base ring·vent holes)

A plastic chastity cage sized with a single base ring. Normally you have to try four or five rings in turn to find the size that fits, but on this product one ring opens and closes from 35mm to 45mm. The body is finished smooth, with no molding marks.

From 35mm to 45mm with one ring

With a fixed size ring, one wrong choice means buying again, but this ring is adjusted by hand until it fits. It is listed as covering the range of the Vietnamese male average, and within that range it reduces the chance of a sizing mistake. There is only one ring to look after, so there is less to lose.

Setting the length with four spacers

Four plastic spacers that fit between the cage and the ring come with it. Adding spacers widens the gap and reduces the pull, and removing them brings the cage closer to the base. You can adjust while wearing it, which makes it easy to find the combination that suits your body over the first few days.

A body with many holes, made for long wear

Several holes are drilled through the body, so air passes through and water runs straight out when you wash it. The virgin plastic makes it light and it shows less under clothing, so it is manageable to go about the day in ordinary clothes. Even in summer there is less of a trapped heat feeling.

Before you use it

The trade off for the light weight is that it is not as solid as metal, so a hard knock can crack it. An adjustable ring is convenient, but since you set the tightness yourself it is easy to over tighten at the start, so begin with a little room. The spacers are small and easy to lose while washing.