Flat-head plastic chastity cage

A short black resin chastity device finished flat at the front. Three base rings, a brass padlock, and two keys come with it.

A short cage, flat at the front

Unlike cages that extend out, this one is cut short at the front and left flat. It is small in bulk, so it shows less under clothing and there is less to dig in while you are sitting. In exchange, being short means the pressure at the front during an erection is unmistakable, so it may not suit anyone with generous length from the outset.

Rings in three sizes, 45, 50, and 55

The three base rings are each stamped with a number, 45, 50, or 55. These are in millimeters, and this measurement is what decides both fit and safety in a chastity device. Measure the base while relaxed, then try them on and choose the one that leaves room for a fingertip between the ring and the skin. Too loose and the cage pushes out, too tight and the blood does not get through.

Front ventilation holes and an integrated lock

Several round holes are grouped across the front face, so air passes through and urine and water drain out. You can rinse the inside by running water over it while it is locked on. The lock is set into the top of the cage, and a brass padlock with two keys comes with it.

Before you use it

Being resin, it is lighter than metal and not cold in winter, but it is less rigid. Forcing it apart while putting it on will crack it. A short cage gives a strong sense of control but needs time to get used to, so start with an hour or two at first. You cannot get it off if you lose the key, so it is safer to keep the spare somewhere else.