One-piece lightweight metal chastity cage (2 ring sizes)

A chastity device with a metal cage cast in one piece and closed with a brass padlock. Wave-shaped openings run across the surface of the cage, so the inside is visible and water passes straight through. The ring comes in 4cm and 4.5cm, and the ring, the cage and the lock make up one set.

A cage cast in one piece

On a cage assembled from joined bars, the joints are the weak points. This cage is cast as a single piece, so there are no joints and the shape does not distort. The surface is finished smooth to reduce scraping during wear. It is metal, but it sits on the lighter side compared with cast stainless steel products.

A build you can wash without taking off

The sides of the cage are widely open, so you can pour water through and wash the inside while locked. That means care without the trouble of removing and refitting it every day, which helps if you wear it for long stretches.

The lock and the ring

One set consists of a single ring, the cage and the lock. The lock is a brass padlock that hangs on the outside of the cage. Unlike a mechanism seated in the joint, it is simple to open and close, and you can swap the padlock alone if you want. The ring only comes in 4cm and 4.5cm, so it will not fit if your relaxed circumference falls outside that range.

What to know before you use it

A padlock hanging outside catches on clothing and can make noise as you walk. In a setting where you need to stay quiet, that can be distracting. Note in advance as well that with only two ring sizes, the range of choice is narrow.