Anal and vaginal douche nozzle (aluminium alloy·connects to shower·15cm)

An anal douche nozzle that connects to a shower or bidet hose. Unlike the type that holds water in a bulb, it connects straight to the water supply, so there is no need to refill. It is also used for vaginal rinsing.

How it differs from a bulb

There is no reservoir, so there is no limit on how much water you can use at once and the preparation time is short. The pressure is set at the valve on the nozzle itself, so you can change the strength in your hand. It is shaped to be worked alone, so you do not need anyone else's help.

Dimensions and material

The product is 15cm to 16.2cm long, and the nozzle tube is 1.97cm to 2.7cm across. The material is rust-free aluminium alloy and the color is bare metal. Being metal, it stands up to alcohol disinfection and can be washed and used for a long time.

The order of rinsing

Start with the pressure low and rinse only the inside of the rectum. If you want to rinse deeper, raise the pressure a little, and once the water is in, rub the abdomen gently so the water reaches the inner corners. Then let it out slowly and repeat five to six times until the water comes out clear.

Before you use it

Water pressure is the thing to be most careful about with this tool. It connects directly to the water supply, so opening the valve wide sends water in hard and can injure the lining of the bowel. Always start at the weakest pressure and raise it a little at a time. Set the water to lukewarm and do not use hot water. Repeating it several times a day is not good for you, and if there is pain or bleeding you have to stop immediately. The nozzle is metal and slippery in wet hands, so handle it slowly.