Gold glans ring (no piercing needed·two balls)

A C shaped ring that fits into the narrow groove below the glans without any piercing. One side is open so it slides in from the side, and each end carries a ball 8mm in diameter. The material is stainless steel with a gold plated finish.

Worn without a piercing

It looks like piercing jewelry, but no hole is needed. The groove below the glans is narrow, and the ring catches and holds there. It is made for people who want the feel of metal jewelry without going through the pain of a piercing and the healing period.

The balls cannot come off

The balls at each end are welded to the ring rather than screwed on. Screw on balls can work loose during movement and be left inside a partner's body, and this product removes that worry. In exchange, the balls cannot be taken off, so you cannot swap in a different ball size. The two 8mm balls catch during penetration and create friction.

Two sizes

It comes as 3×25×8mm and 3×28×8mm. That means a bar thickness of 3mm, an inner width of 25mm or 28mm, and a ball diameter of 8mm. Measure the girth of the shaft below the glans and pick whichever is closer. Too wide and it slips down, too narrow and it constricts and hurts.

What to know before you use it

It is a constricting ring, so time itself is the risk. Do not go past 30 minutes, and take it off if you feel numbness or see a change in color, no matter how long it has been on. An erection increases the girth and tightens it further, so remove it right away if it hurts in that state. The surface is gold plating, which rubs off if you scrub it roughly, and a stripped spot becomes rough against the skin. There are only two sizes, so it may not fit you exactly, and do not fit it over a wound or an area that has not healed.